DRAWING-BASED CUSTOM MANUFACTURING

Custom Tube Bending & Fabricated Tube Parts

We manufacture custom bent tubes and tubular components from drawings, samples, or assembly requirements. Tube diameter, wall thickness, bend radius, hole pattern, end forming, welded features, surface finish, and packaging can all be matched to the application.

Send Drawings for Quote View Capabilities

Custom bent tube parts manufactured from drawings

PROJECT SNAPSHOT

Capability Summary

Part TypesBent tubes, handle tubes, punched tubes, frame tubes and tube assemblies

MaterialsCarbon steel, stainless steel, aluminum and galvanized tube

ProcessesCutting, bending, hole processing, end forming, welding and finishing

InspectionSection, bend radius, orientation, hole position, assembly and finish

SupplyPrototype through repeat production

PART TYPES

Part Types

Bent tubes
Handle tubes
Punched tubes
Frame tubes
Tube assemblies

ENGINEERING REVIEW

What Matters in a Tube Bending Project?

Share the information you know. Open items can be identified during the initial manufacturability review.

Tube-part review connects section size and wall thickness with bend radius, straight lengths and the orientation of every bend plane. Hole positions, end features and welded interfaces are then checked against the formed geometry, because these relationships determine process order and inspection datums. For assemblies, identify the functional ends, mating directions, critical clearances and surfaces that need protection during finishing. This information supports a route covering tube cutting, bend setup, forming, hole processing, welding and geometry inspection.

Tube section
Wall thickness
Bend radius
Multiple-bend orientation
Hole position
End forming
Welded assembly geometry
Surface finish

Send Drawings for Quote

MANUFACTURING ROUTE

Manufacturing Route

The route is selected around the drawing, material, geometry, interfaces and acceptance requirements.

01Tube specification review
02Cutting and bend setup
03Bending, holes and end forming
04Welding and finishing
05Geometry and final inspection

View Capabilities

PRODUCT-SPECIFIC QUALITY

Quality Checks for Tube Bending & Tubular Parts

Inspection points are defined from the drawing and project requirements.

Tube section and wall
Bend radius and angle
Bend-plane orientation
Hole and end position
Assembly geometry

View Quality Control

TECHNICAL RESOURCES

Related Technical Resources

View the Tube Bending Design Guide Select Tube Wall and Section Download the RFQ Workbook

FAQ

Frequently Asked Questions

Can you bend round, square and rectangular tube?

These sections can be reviewed according to size, wall thickness, bend radius, bend orientation and the required geometry.

What information is needed for multiple bends?

Define the bend sequence, bend-plane orientation, straight lengths, end orientation and critical hole relationships where available.

Can holes and welded parts be added after bending?

Hole processing, end features and welded details can be reviewed as part of the complete tube fabrication route.

RFQ CHECKLIST

What to Send for Review

Send what you have. Items that are not yet defined can remain open for the initial review.

2D drawing and 3D model, if available
Sample photo or application requirement
Material and key dimensions
Critical interfaces and tolerances
Estimated quantity
Finish and inspection requirements

START A PROJECT REVIEW

Have a Drawing or Sample Ready?

Send your drawing, CAD file, sample photo or project description for an initial manufacturing review.