DRAWING-BASED CUSTOM MANUFACTURING
Custom Welded Frames & Structural Assemblies
We customize welded frames and support structures based on drawings, samples, or on-site installation requirements. Tube, plate, and profile structures can be welded in combination, with custom frame dimensions, connection holes, reinforcement, surface finish, and packaging.
PROJECT SNAPSHOT
Capability Summary
PART TYPES
Part Types
- Equipment frames
- Support stands
- Rack structures
- Base frames
- Structural assemblies
ENGINEERING REVIEW
What We Review Before Producing a Welded Frame
Share the information you know. Open items can be identified during the initial manufacturability review.
Welded-frame review begins with datums, overall geometry, material sections and joint design. Fixture strategy and welding sequence are considered with squareness, flatness, mounting interfaces and distortion-sensitive areas so inspection references remain clear. If other parts will be installed on the frame, identify locating points, access directions, trial-fit requirements and finish or packing protection zones. These details guide cutting, fit-up, fixturing, welding, trial assembly, finishing and final interface inspection.
- Material section
- Joint design
- Fixture strategy
- Welding sequence
- Distortion
- Mounting interfaces
- Trial assembly
- Finish
- Packaging
MANUFACTURING ROUTE
Manufacturing Route
The route is selected around the drawing, material, geometry, interfaces and acceptance requirements.
- 01Drawing, datum and joint review
- 02Cutting and fit-up
- 03Fixturing and welding sequence
- 04Trial assembly and finishing
- 05Geometry, interface and packing inspection
PRODUCT-SPECIFIC QUALITY
Quality Checks for Welded Frames & Support Structures
Inspection points are defined from the drawing and project requirements.
- Datums and overall dimensions
- Squareness and flatness
- Weld and distortion condition
- Mounting interfaces and trial fit
- Finish and packing protection
TECHNICAL RESOURCES
Related Technical Resources
FAQ
Frequently Asked Questions
Can you manufacture welded frames from drawings?
Yes. Drawings should identify overall dimensions, material sections, joints, datums, mounting interfaces and critical acceptance requirements where available.
How are welding distortion and repeatability reviewed?
Joint design, fixture strategy, welding sequence, heat input, datums and post-weld inspection are reviewed together.
Can trial assembly be included?
Trial assembly can be reviewed where mating parts, fixtures or defined interface checks are available.
RFQ CHECKLIST
What to Send for Review
Send what you have. Items that are not yet defined can remain open for the initial review.
- 2D drawing and 3D model, if available
- Sample photo or application requirement
- Material and key dimensions
- Critical interfaces and tolerances
- Estimated quantity
- Finish and inspection requirements
START A PROJECT REVIEW
Have a Drawing or Sample Ready?
Send your drawing, CAD file, sample photo or project description for an initial manufacturing review.